日本SMC壓力傳感器,SMC壓力傳感器
動作原理如下圖所示，由氣橋回路構成。在檢出噴口（S4）上提供檢
測間隙，用設定手輪S3使加在壓力傳感器上的壓力平衡（P1=P2）。
＊通過氣橋回路和半導體式壓力傳感器的構成，
Temperature characteristics
Orange light is turned on. (When energized)
Operating: 0 to 50°C, Stored: –20 to 70°C (No freezing or condensation)
Operating/Stored: 35 to 85% RH (No condensation)
適合傳感器：PSE53□,54□,56□
1個控制器可監控不同功能的傳感器。
＊可穩(wen)定的檢出0.01~0.5mm的間隙。

日本SMC壓力傳感器,SMC壓力傳感器

＊帶LED水平計，zui適位置一目了然。
＊集裝時，增減位數簡單。采用插座式連接，減少配線工作。
＊可與減壓閥、2通電磁閥組合，減少配管工作。.
1000 VAC, 50/60 Hz for 1 minute between live parts and case
50 MΩ or more between live parts and case (at 500 VDC Mega)
10 to 150 Hz at whichever is smaller of 1.5 mm amplitude or 100 m/s2 acceleration,
in X, Y, Z directions, for 2 hours each (De-energized)
300 m/s2 in X, Y, Z directions, 3 times each (De-energized)
±3% F.S. or less (Based on 25°C)
不易受供給壓力變動的影響。
適用于風量管理、過濾器孔眼堵塞、液面檢測等。
模擬輸出 (電壓/電流)
1個控制器可監控4個壓力傳感器。